Clube MazdaPT

Clube MazdaPT (http://www.mazdapt.com/forum/index.php)
-   Mazda3 (http://www.mazdapt.com/forum/forumdisplay.php?f=119)
-   -   Teste de Diagnóstico ao Quadrante (http://www.mazdapt.com/forum/showthread.php?t=11718)

Spawm 25-06-2007 12:09

Teste de Diagnóstico ao Quadrante
 
Bem a pedido da gerência aqui fica o Post num tópico autonomo:


Fica o texto original em inglês para não haver erros de tradução.


Instrument Cluster User Diagnostics

1. Insert car key into ignition
2. Press and hold Odometer Trip Reset switch on the instrument cluster
3. Turn car key to the ON position
4. Wait 4 seconds until you see the words "TEST" displayed on the instrument cluster
5. Let go of the Odometer Trip Reset switch

Pressing the Trip Reset button will now cycle through a series of diagnostic tests.

The following DTCs (Diagnostics Test Codes) will be displayed with each press of the
Trip Reset.


DTC
Display
Test Description


01
On/Off
Drive side Seatbelt engaged/disengaged

04
On/Off
Door open, door close

08
TNS relay
Lights on reminder buzzer - requires relay access to test

12
Speedometer
Performs a full Speedometer sweep from 0 to Max then comes to rest at 60kph or 37 mph

13
Tachometer
Peforms a full Tachometer sweep from 0 to Max them comes to rest at 3K rpm

14
On/Off
Tests instrument cluster buzzer sound

16
On/Off
Cycles On/Off and fuel warning light

18
On/Off
Flashes Ignition key illumination on/off

22
Numeric
Displays fuel sender's current fuel level

23
Fuel gauge
Performs a full sweep of the fuel empty/full guage

25
Temp gauge
Performs a full sweep of the engine temperature guage

26
LED
Full LCD illumination test

31
Key reminder
Displays key position

50/51
- -
Unknown



É possivel mudar os valores de alguns códigos carregando no botão Info. mas não o aconselho...
Existe um deles que tem a ver com a reserva, é possivel meter a avisar mais cedo ou mais tarde (vou ver se acho o texto completo para isso e coloco mais tarde).

MigBric 25-06-2007 23:07

Re: Teste de Diagnóstico ao Quadrante
 
Citação:

Post Original de Spawm
Bem a pedido da gerência aqui fica o Post num tópico autonomo:


Fica o texto original em inglês para não haver erros de tradução.


Instrument Cluster User Diagnostics

1. Insert car key into ignition
2. Press and hold Odometer Trip Reset switch on the instrument cluster
3. Turn car key to the ON position
4. Wait 4 seconds until you see the words "TEST" displayed on the instrument cluster
5. Let go of the Odometer Trip Reset switch

Pressing the Trip Reset button will now cycle through a series of diagnostic tests.

The following DTCs (Diagnostics Test Codes) will be displayed with each press of the
Trip Reset.


DTC
Display
Test Description


01
On/Off
Drive side Seatbelt engaged/disengaged

04
On/Off
Door open, door close

08
TNS relay
Lights on reminder buzzer - requires relay access to test

12
Speedometer
Performs a full Speedometer sweep from 0 to Max then comes to rest at 60kph or 37 mph

13
Tachometer
Peforms a full Tachometer sweep from 0 to Max them comes to rest at 3K rpm

14
On/Off
Tests instrument cluster buzzer sound

16
On/Off
Cycles On/Off and fuel warning light

18
On/Off
Flashes Ignition key illumination on/off

22
Numeric
Displays fuel sender's current fuel level

23
Fuel guage
Performs a full sweep of the fuel empty/full guage

25
Temp guagePerforms a full sweep of the engine temperature guage

26
LED
Full LCD illumination test

31
Key reminder
Displays key position

50/51
- -
Unknown



É possivel mudar os valores de alguns códigos carregando no botão Info. mas não o aconselho...
Existe um deles que tem a ver com a reserva, é possivel meter a avisar mais cedo ou mais tarde (vou ver se acho o texto completo para isso e coloco mais tarde).


Não será GAUGE em vez de GUAGE no texto original ?

Spawm 25-06-2007 23:10

é bem provavel que seja GAUGE em vez de GUAGE lol mas como não fui eu que escrevi o texto original.

já vou corrigir...

MigBric 25-06-2007 23:24

Este tópico está porreiro :) É um tipo self-test

Spawm 26-06-2007 18:16

Mais um Teste ao Auto Rádio


LCD Inspection
1. With the audio power on, press the POWER button and simultaneously press the SEEK button (upper) for approx. 1 s.

2) Start the LCD inspection mode.
The characters displayed on the LCD are not truncated or faint. The LCD is normal.

3. Turn the audio off or the ignition switch to the LOCK position to stop the diagnostic assist function.


Button Inspection
1. With the audio power on, press the POWER button and simultaneously press the CLOCK button for approx. 1 s.

2) Start the button inspection mode.
• Press all buttons. - The buzzer sounds. The button is normal.
The buzzer does not sound. Replace the base unit.

3. Turn the audio off or the ignition switch to the LOCK position to stop the diagnostic assist function.


Speaker Inspection
1. With the audio power on, press the POWER button and simultaneously press the AUTO-M button for approx. 1 s.

2) Start the speaker inspection mode.
• Does each speaker output sound in the following order?
A. Front passenger-side door speaker and tweeter
B. Front driver-side door speaker and tweeter
C. Driver-side rear door speaker
D. Passenger-side rear door speaker

3. Turn the audio off or the ignition switch to the LOCK position to stop the diagnostic assist function.


Radio Reception Condition Inspection
1. With the audio power on, press the POWER button and simultaneously press the PRESET 2 button for approx. 1 s.

2. Inspect accordingly.

Caution
• Even if the system is normal, radio reception may be difficult depending on where the system is inspected (indoors/outdoors, or conditions at the location). Before inspecting the system, verify that radio reception is adequate.
• When inspecting, select a frequency band (radio station) with the best reception.

Rating as follows:

5-9 Antenna, antenna feeder and base unit are normal
3-4 Change the frequency (radio station) and inspect again.
0-2 Inspect the antenna and antenna feeder.

• If either the antenna or the antenna feeder is not normal, replace the malfunctioning part.
• If the antenna and antenna feeder are normal, replace the base unit.

3. Turn the audio off or the ignition switch to the LOCK position to stop the diagnostic assist function.

MigBric 26-06-2007 20:15

;) do melhor :lol:

Spawm 27-06-2007 22:41

Video do teste ao quadrante

Youtube

ZeroStage 27-06-2007 23:04

tchee....
curti totil!!
tb kero fazer isso no meu!!
loool :lol:

_MoReNo88_ 28-06-2007 01:28

Xeee... será que no meu também dá para fazer isso!? :lol: :lol: :P

Trieste 28-06-2007 01:33

Um dia destes tenho de ir experimentar o truque. :D


Hora GMT. São agora 00:07.

Powered by: vBulletin Version 3.8.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.